iFixit destroys Apple HomeView, finds lots of glue and endless frustration

iFixit’s teardown of the new Apple HomeView is now complete, revealing a device that seems almost impossible to take apart and repair. Watch it below.

iFixit rips Apple HomeView in many ways

Following the launch of Apple HomeView last week, iFixit today released a teardown of the device.

Unlike recent teardowns, which revealed significant improvements in repairability with greater component modularity and easier access to internals, the HomeView fought almost to the end.

With heavily glued or glued components, including the display, speakers, antennas, and motherboard, disassembly proved particularly difficult, even after the adhesive securing the display speakers was soaked with isopropyl alcohol.

At one point, one of them broke during removal, while the motherboard required considerable force to separate from the chassis due to the thermal adhesive holding it in place.

iFixit’s teardown covered both variations of HomeView: the tabletop model and the wall-mounted version. Interestingly, there are some internal differences between them, as the wall-mounted model has a slightly wider motherboard to accommodate the capacitors housed in the base of the tabletop version.

As a result, the wall-mounted HomeView also has smaller internal speakers, which helps explain the differences between their audio systems that Apple already acknowledged at launch.

Returning to the tabletop model, iFixit’s teardown also showed that separating the screen from the base requires either specialized tools or extensive and potentially destructive disassembly of the screen assembly, thanks to the way Apple routed the connection cables through the swivel mechanism.

Once iFixit was in the base, however, some good news arrived: the USB-C port is modular and relatively easy to access, as are the passive radiators and the card powering the lower assembly.

Still, an extremely short cable connecting the woofer to the board underneath made disassembly difficult, with iFixit wondering how anyone could reconnect it during reassembly.

Given all these repairability challenges, Shahram Mokhtari joked that while iFixit doesn’t have an official repairability dashboard for this category of devices, it would give Apple HomeView a “BEEP this thing” out of 10.

You can watch the teardown below:

To view iFixit’s blog post, which features an interactive HomeView 3D scanner, follow this link.

Also be sure to check out 9to5Mac’s review of Apple HomeView.

To discover on Amazon

Add 9to5Mac as a preferred source on Google
Add 9to5Mac as a preferred source on Google

FTC: We use automatic, revenue-generating affiliate links. More.

Gn tech

Logo